60 dB (Max Fan Speed). Heater & AC Core Design. Copper Tubes with Pressfit Aluminium Fins. R-12, R-22, R-134a, R-502, MP39, MP66, R404a, R1234yf.
Compact Heat & Air Conditioning Unit 12v. Right Angled BZP Steel Mounting Brackets. Please wire up the AC unit as per the wiring diagram below, if you have any questions please don't hesitate to get in touch with us.
Condenser Fan: If you are mounting your condenser radiator in front of your engine radiator then you may use your existing electric engine radiator fan to cool the condenser when required. You simply need to'T' into the trigger feed on the electric fan relay. If you are installing this into a classic car with a viscous fan then you will need an additional electric fan on the front of the condenser. Fan Control Switch: The fan uses an onboard resistor pack, therefore only a 4 position switch is required to operate.
Purple Thermostat Wires: It does not matter which way around the purple wires are connected. Thermostat - Condenser Fan Relay & Pressure Switch. Please note that a corrosion inhibitor such as glycol or anti-freeze should be used to prevent corrosion and prolong the useful life of all components used in the vehicles cooling system. You will need to run an ON/OFF or Bypass Water Valve to prevent hot water flowing through the heater core when the air conditioning is activated. This is not a complete kit, you will require a 4 Position Fan Switch, A/C ON/OFF Switch, a Condenser radiator, a Compressor, a Receiver/Dryer Bottle, Binary or Trinary Switch, Hoses etc.
The item "Compact Heating & Air Conditioning Unit 12v Kit, Race, Rally, Classic Car" is in sale since Friday, February 09, 2018. This item is in the category "Vehicle Parts & Accessories\Car Parts\Air Conditioning & Heating\Other A/C & Heating". The seller is "t7design" and is located in Exeter, Devon. This item can be shipped to European Union member countries.